Input voltage |
• Rated tus nqi (DC) | 24 V |
• rau lub teeb liab "0" | -30 rau +5 V |
• rau lub teeb liab "1" | +11 txog +30V |
Input tam sim no |
• rau lub teeb liab "1", ntaus ntawv. | 2.5 mA |
Input ncua (rau qhov ntsuas tus nqi ntawm input voltage) | |
rau standard inputs | |
- parameterizable | Yog; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20ms |
- ntawm "0" rau "1", min. | 0.05ms ib |
- ntawm "0" rau "1", max. | 20ms ib |
- ntawm "1" rau "0", min. | 0.05ms ib |
- ntawm "1" rau "0", max. | 20ms ib |
rau interrupt inputs | |
- parameterizable | Yog lawm |
rau kev ua haujlwm thev naus laus zis | |
- parameterizable | Yog lawm |
Cable ntev |
• shielded, max. | 1 000 m |
• unshielded, max. | 600 m |
Encoder |
Txuas tau encoders | |
• 2-xaim sensor | Yog lawm |
- tso cai quiescent tam sim no (2-xaim sensor), | 1.5 mA |
max. | |
Isochronous hom |
Lim thiab ua lub sijhawm (TCI), min. | 80s; Thaum 50 卩s lim lub sij hawm |
Lub sijhawm caij tsheb npav (TDP), min. | 250 ua |
Interrupts/diagnostics/status information |
Diagnostics muaj nuj nqi | Yog lawm |
Tswb |
• Diagnostic tswb | Yog lawm |
• Kho vajtse cuam tshuam | Yog lawm |
Kev kuaj mob |
• Saib xyuas cov khoom siv hluav taws xob | Yog lawm |
• Hlau tawg | Yog; rau kuv <350 卩A |
• Luv-circuit | No |
Diagnostic taw qhia LED |
• Khiav LED | Yog; ntsuab LED |
• XOV XWM LED | Yog; liab LED |
• Saib xyuas cov khoom siv hluav taws xob (PWR-LED) | Yog; ntsuab LED |
• Channel xwm txheej zaub | Yog; ntsuab LED |
• rau kev kuaj kab mob | Yog; liab LED |
• rau kev kuaj mob module | Yog; liab LED |
Muaj peev xwm sib cais |
Muaj peev xwm sib cais raws | |
• nruab nrab ntawm cov channel | Yog lawm |
• nruab nrab ntawm cov channel, hauv pab pawg ntawm | 16 |
• nruab nrab ntawm txoj kab thiab tsheb npav rov qab | Yog lawm |
• nruab nrab ntawm cov channel thiab lub hwj chim mov ntawm lub | No |
hluav taws xob | |
Muab cais nyob ib leeg |
Kev rho tawm kuaj nrog | 707V DC (hom xeem) |
Cov qauv, kev pom zoo, daim ntawv pov thawj |
Haum rau kev nyab xeeb ua haujlwm | No |